Fantom Doorstop


Modern, Stylish & Discreet Doorstop Solution.

The Fantom Doorstop Solution (FDS) is like no other on the market today. Using rare-earth magnet technology, the FDS eliminates the trip hazard by concealing all product components either inside the door itself, or hidden below floor level.

The unique hold-open feature eliminates wind drafts from slamming doors, and also assists in situations in aged care where people need to be safely moved in and out of rooms without the door closing on them.

 

 

VIDEO

VIDEO

AESTHETICS

AESTHETICS

The Fantom Doorstop has a flush finish to the floor. This modern finish creates minimal intrusion and should not interfere with your current decor at all. The clear sleeve comes standard in the packet. This option allows the flooring surface to show through and almost makes Fantom invisible. This is by far the most popular choice. If you prefer to make a feature out of Fantom and make it stand out, then we offer White and Black which can be ordered on site.

ADVANCED FEATURES

ADVANCED FEATURES

The patented design of the Fantom Doorstop Solution (FDS) attributes an in-floor pin that is activated by the passing over of the rare-earth magnet concealed within the door. Once activated, the pin strikes the specially designed and individually patented ‘dimple and lip’ striker plate which not only stops the door, but also holds it firmly in the open position.

 

DOUBLE DOORS

Double doors have an operable door that is walked through and a stationary door that is traditionally held in position by face mounted drop bolts but can also be opened when desired. You can now use the fully concealed Fantom above and below the door instead of the face mounted drop bolts. This means you will have the feature clear sleeves on the floor instead of the metal cover plate for the drop bolts, and when the door is held in its position, Fantom is fully concealed. But best of all, when you want to open both doors, it’s just a gentle push to release, and then a gentle push back to re-engage. Great for tall doors to avoid reaching up to the top drop bolt! When it comes to opening either door, you can use Fantom as normal to stop the door and hold it open.

 

PIVOT DOORS

We have a new specially designed striker plate without a turn down lip especially for pivot doors. This allows the door to be held in position but also allows the door to slide off in both directions. If desired, you can have multiple Fantoms to create different hold open positions. You can order the pivot striker from the website or buy it from stockists.

 

ALUMINIUM FRAME DOORS

You will have to adapt the frame to suit your door. When you look under an aluminium door, the extrusion is hollow. This needs to filled with timber, (preferably treated) only where you want to install the magnet. Can be tight fit and glued in place, or you can screw through the face to hold this in place. From here it is a normal installation.

 

DOOR CLOSER ON EXISTING DOOR

The magnet is strong enough to withstand the gentle initial pull of a door closer. If however it doesn’t, you should be able to set or adjust the closer to reduce the initial pull.

 

LARGER DOORS – QUITE HEAVY

No problem, this will not affect the function of Fantom Doorstop at all. Just install as normal. The pin will still fire at the same speed and stop the door and the hold open strength will not change.

 

CARPET

It is suited to short pile carpet as you can push the sleeve down into the sub-floor to get good bearing without going to deep into the carpet pile. Long/deep pile carpet is harder and not advised due to the gap created between the door and the sleeve. ( Because the door needs to flow over the carpet and the floor sleeve has to push deep into the pile. More than likely this will create a gap of more than 15mm max recommended.)

IMPORTANT – When installing into carpet, you need to punch or cut away the area of carpet you are about to drill to remove the carpet pile. If you don’t, the carpet will wrap around your drill bit and will cause a run in your flooring. If you don’t have a carpet punch, you can use a Stanley knife or small chisel.

SECURITY

SECURITY

sec

The Fantom Doorstop has a flush finish to the floor and therefore creates a no trip hazard.

The striker plate is designed with a hold open ‘dimple’ in the middle and a ‘turned down stop lip’ on one side only. This lip stops the door from traveling over the floor sleeve and the dimple then holds the door in that position. To release the pin and close the door simply pull on the door as you normally would and the pin will travel out of the dimple and slide off the plate until the door is free. The pin will then just fall back down into the sleeve. Simple and easy.

TECHNICAL DATA

TECHNICAL DATA

Easy to install.

 

The recommended gap between the floor and the door should not exceed 15mm. If the gap is 15mm or more, the 5mm Fantom packer must be installed between the door and the striker plate. This packer is specially designed to bring the striker plate down to an acceptable gap and still allow the magnet to sit down on top of the striker plate ensuring normal function. There is no need to ever have longer pins. 

 

We recommend 1 packer only. This means a 20mm gap under your door will reduce down to less than 15mm which is where you want to be.
If your gaps are bigger than that, then Fantom Doorstop Solution will not be suitable for this situation.

 

A standard 14mm hole in the floor 50mm deep, is all it takes.

 

Very little maintenance is necessary, and really depends where it is installed. For normal installations there will be no need for any maintenance. If it is installed in areas where exposure to high levels of dust, (like outdoor areas or decks) or some liquid compounds, (like found in pubs/bars and factories) then it may be necessary to remove pin from sleeve and give it a wipe over and dry off and place it back in sleeve.

 

It is an N33 Neodymium rare earth magnet. It pulls the pin out of the ground in 2/25ths of a sec. Once it is in the hold open position, it will hold your door there against the strongest of through drafts. It does this by working in conjunction with our patented ‘dimple and lip combination’.

WARRANTY

WARRANTY

There is a lifetime full replacement warranty. If installed correctly, The Fantom Doorstop Solution will continue to function correctly for life.

 

 

 

ACCESSORIES

The patented design of the Fantom Doorstop Solution (FDS) attributes an in-floor pin that is activated by the passing over of the rare-earth magnet concealed within the door. Once activated, the pin strikes the specially designed and individually patented ‘dimple and lip’ striker plate which not only stops the door, but also holds it firmly in the open position.

 

Installation Kit

INSTALLATION KIT

Packers

PACKERS

sleeves

SLEEVES & MAGNET